Technical Specifications

Technical Specifications

The AquaGem is a fully self-contained mini water purification plant. It contains all the pumps necessary to draw water from a source, pump it through the unit and deliver it into a storage reservoir. The AquaGem frame, containing the components, is clad in attractive, weatherproof Chromadek. Access to the components is via a lockable steel door.

The AquaGem consists of a primary pump that draws water from the raw source to the primary clarification unit. The clarification is done by the partial removal of suspended solids in a clarifier assisted by the addition of a flocculant into the raw water line.
The clarified water is then pumped by a secondary pump into a deep bed sand filter for final cleaning.
At this point the disinfectant solution is dosed into the clear water on its way to a clear water storage tank.
From this tank, the necessary reticulation can be done.
Due to its very low power requirements, electricity can be supplied by a small genset (1.5 kVA) or a wind generator, or a small solar cell array.

Specifications

Physical Dimensions approx. 1.1m x 1.1m x 2.6m high
Weight (dry) approx. 140 kg + 100kg filter
Power Consumption approx. 800W ( 1470 VA abs)
Power supply 220 - 240 V - 7Amp @ p.f. 0.6
3 ph and DC (solar) units available on request.
Water throughput 4000 litres / hour @ 30m total head
Delivery head standard - 30m
Suction lift of primary pump standard - 3 m for centrifugal pump
optional - up to 80m lift for submersible pump
Dosing pumps standard - peristaltic, non-adjustable.
optional - diaphragm type, adjustable
optional - solid powder dosing units
Chemical containers standard - 2 x 25 litre
Filter 0.6 -0.9 mm hi-grade, Fe-free sand with multiport valve
Activated carbon filter Optional for taste / colour problems

site powered by Chilli Websites

Site graphics by jenious